Synonyms for canbus or Related words with canbus
Examples of "canbus"
The MilCAN working group was formed in 1999 as a sub-group of the International High Speed Data Bus - Users Group (IHSDB-UG) when a need was recognised to standardise the implementation of
within the military vehicles community. The mission statement of this group was “To develop, for various application classes in all military vehicles, a common interface implementation specification based on
Nowadays some vehicles are being fitted with
networks, and some of these use the
to connect the tow bar electrics to various safety systems and controls. For vehicles that use the
to activate towing-related safety systems, a wiring kit that can interact appropriately must be used. Without such a towbar wiring kit the vehicle can not detect the presence of a trailer and can therefore not activate safety features such as Trailer stability program which can electronically control a snaking trailer or caravan.
The dimensions of the iCub are similar to that of a 3.5 year old child. The robot is controlled by an on-board PC104 controller which communicates with actuators and sensors using
Both feature an embedded PC, touchscreen, approximately 8x8x8" build area with heated build platform, and modular hot swapable print heads. Heads include cold, warm, and hot flow. Syringe and extruders. linked via
CHIPS users will, in most cases, be able to work with several serial data transceiver sources at the same time. Such serial data might originate from PC Keyboards,
, RS and wireless communication where all data connects into one or several CHIPS units that communicate over the mixed serial data protocols.
A passthrou device is used in conjunction with a computer to reprogram vehicle control modules through the OBD-II/
port. Each manufacturer has their own type, but SAE International standardized the J-2534 universal requirements in 2004, requiring all manufacturers to allow vehicles sold in the United States of America and Europe to accept powertrain reprogramming through specific universal parameters.
ISO 11783, known as Tractors and machinery for agriculture and forestry -- Serial control and communications data network (commonly referred to as "ISO Bus" or "ISOBUS") is a communication protocol for the agriculture industry based on the SAE J1939 protocol (which includes
The string potentiometer may be connected as a three-wire tapped resistor (voltage divider), in a control circuit, or may be packaged with electronics to produce a measurement signal in a useful form, such as a variable voltage 0-10 VDC, variable current 4-20mA, pulse encoder, Bus (DeviceNet and
) and RS232 communications.
In order to communicate with the driver, a race ECU can often be connected to a "data stack", which is a simple dash board presenting the driver with the current RPM, speed and other basic engine data. These race stacks, which are almost always digital, talk to the ECU using one of several proprietary protocols running over RS232 or
, connecting to the DLC connector (Data Link Connector) usually located on the underside of the dash, inline with the steering wheel.
Besides, by the end of 2013, two of the 40 brand-new Yutong ZK5125A trolleybuses have arrived Ji'nan. These new trolleybuses are featured with 12-meter body length, air-conditioning, one-step low floor, leather-covered seats, "maternal-and-child" seat, full
system, Chinese LED head scrollers, secondary Lithium battery system and more. These new trolleybuses may be employed by either the Route 101 or 102, replacing the oldest batch of JK6120D.
Analyzers are now available for virtually all existing computer and embedded bus standards and form factors such as PCI Express, DDR, USB, PCI, CompactPCI, PMC, VMEbus,
and LINbus, etc. Bus analyzers are used in the Avionics industry to analyze MIL-STD-1553, ARINC 429, AFDX, and other avionics databus protocols. Other bus analyzers are also used in the mass storage industry to analyze popular data transfer protocols between computers and drives. These cover popular data buses like NVMe, SATA, SAS, ATA/PI, SCSI, etc. These devices are typically connected in series between the host computer and the target drive, where they 'snoop' traffic on the bus, capture it and present it in human-readable format.
Since the early 2000s, vehicle technology has moved forward introducing
network systems which allowed the interaction of different systems, and also the detection of a trailer or caravan. In some cases, the manufacturers have not only designed automobiles to sense the presence of a trailer, but they have also created enhanced new features within the systems connected to the network. This actually makes it important that these particular vehicles can "see" the trailer or caravan. A few of these new features are for safety and stability, but most are merely convenience things like automatically switching off the rear fog light and parking sensors. The main new safety feature, appearing now on some cars, is the Trailer Stability Program which automatically turns on when a trailer detected in the network through the dedicated sensors.
Copyright © 2017