Synonyms for homeplug or Related words with homeplug

homepna              moca              wigig              hpav              hpna              wirelesshd              wimedia              powerline              docsis              havi              lonworks              displayport              homeplugav              phoneline              xenpak              insteon              wirelesshart              gbe              gpon              advancedtca              vdsl              arinc              bpl              devicenet              xfp              mboa              xdsl              wihd              atca              diiva              wusb              knx              picmg              dvb              spdif              coax              fdqam              mhl              bacnet              thunderbolt              hdbaset              opencable              greenphy              eurodocsis              usnap              avb              cablecard              etsi              zigbee              miracast             



Examples of "homeplug"
In 2010, the IEEE 1901 was approved and HomePlug AV, as baseline technology for the FFT-OFDM PHY within the standard, was now an international standard. The HomePlug Powerline Alliance is a certifying body for IEEE 1901 products. The three major specifications published by HomePlug (HomePlug AV, HomePlug Green PHY and HomePlug AV2) are interoperable and compliant.
The first HomePlug specification, HomePlug 1.0, was released in June 2001. The HomePlug AV (for audio-video) specification, released in 2005, increased physical layer (PHY) peak data rates from approximately 13.0 Mbit/s to 200 Mbit/s. The HomePlug Green PHY specification was released in June 2010 and targets Smart Energy and Smart Grid applications as an interoperable "sibling" to HomePlug AV with lower cost, lower power consumption and decreased throughput.
The HomePlug Powerline Alliance worked with utilities and meter manufacturers to develop this 690-page specification. HomePlug Green PHY devices are required to be fully interoperable with devices based on HomePlug AV, HomePlug AV2 and IEEE 1901 specification, which is considered to hamper their power consumption and cost reduction. As of the end of 2016, no HomePlug silicon vendor had announced any commercially available Green PHY silicon.
HomePlug is the family name for various power line communications specifications under the HomePlug designation, with each offering unique performance capabilities and coexistence or compatibility with other HomePlug specifications.
HomePlug 1.0 Turbo adapters comply with the HomePlug 1.0 specification but employ a faster, proprietary mode that increases the peak PHY-rate to 85 Mbit/s. HomePlug 1.0 Turbo modems were only available from Intellon Corporation.
The Alliance evaluated several technologies and proposals and subsequently developed, approved and published the HomePlug 1.0 specification in June 2001. In 2005 it published the HomePlug AV specification, which increased physical layer peak data rates from 14 to 200 Mbit/s. It approved and published the HomePlug Command and Control specification in 2007 and the HomePlug Green PHY specification in June 2010.
HomePlug AV as well as the its later extension, HomePlug AV2 both operate in a portions of the RF spectrum directly below what is commonly used for terrestrial FM radio broadcasting. HomePlug AV utilizes BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM, and 1024 QAM modulation strategist between 2 MHz and 3 MHz while the more recent HomePlug AV2 standard extends the upper bound of its spectral use to 86 MHz.
The first HomePlug specification, HomePlug 1.0, provides a peak PHY-rate of 14 Mbit/s. It was first introduced in June, 2001 and has since been replaced by HomePlug AV. On May 28, 2008 Telecommunications Industry Association (TIA) incorporated HomePlug 1.0 powerline technology into the newly published TIA-1113 international standard. TIA-1113 defines modem operations on user-premises electrical wiring. The new standard is the world's first multi-megabit powerline communications standard approved by an American National Standards Institute (ANSI)-accredited organization.
Some HomePlug specifications target broadband applications such as in-home distribution of low data rate IPTV, gaming, and Internet content, while others focus on low-power, low throughput, and extended operating temperatures for applications such as smart power meters and in-home communications between electric systems and appliances. All of the HomePlug specifications were developed by the HomePlug Powerline Alliance, which also owns the HomePlug trademark.
The HomePlug AV2 specification was introduced in January 2012, it is interoperable with HomePlug AV and HomePlug GreenPHY devices and is IEEE 1901 standard compliant. It features gigabit-class PHY-rate, support for MIMO PHY, repeating functionalities and power saving modes. Can use the bandwidth from 30-86 MHz as additional bandwidth.
SPiDCOM had a board member of the HomePlug Powerline Alliance.
HomePlug AV, GP and AV2 are fully interoperable, and will also interoperate with IEEE 1901 devices. HomePlug 1.0 devices do not interoperate with HomePlug AV devices. Although it is technically possible to achieve such backward compatibility, doing so is not economically feasible because of the high cost of circuitry that would have to support different Forward error correction (FEC) techniques and feature sets.
The HomePlug Powerline Alliance is a trade association of electronics manufacturers, service providers, and retailers that establishes standards for, and tests members' devices for compliance to, the various power line communication technologies known as HomePlug.
The HomePlug AV specification, which was introduced in August 2005, provides sufficient bandwidth for applications such as HDTV and VoIP. HomePlug AV offers a peak data rate of 200 Mbit/s at the physical layer, and about 80 Mbit/s at the MAC layer. HomePlug AV devices are required to coexist, and optionally to interoperate, with HomePlug 1.0 devices. The physical layer uses OFDM carriers spaced at 24.414 kHz, with carriers from 2 to 30 MHz. Depending on the signal to noise ratio, the system automatically selects from BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM, and 1024 QAM, on a carrier by carrier basis.
In January 2012, HomePlug Powerline Alliance announced support for IEEE 1905.1 certification.
Linksys offered a variety of HomePlug-based Ethernet-to-Power-line communication products:
The IEEE 1901 standards are promoted by trade groups such as the HomePlug Powerline Alliance and the HD-PLC Alliance.
As of 2017, there are at least six chip vendors shipping HomePlug AV chipsets with IEEE 1901 support: Broadcom, Qualcomm Atheros, Sigma Designs, Intellon, SPiDCOM, and MStar. In 2011, the HomePlug Green PHY specification was adopted by Ford, General Motors, Audi, BMW, Daimler, Porsche, and Volkswagen, as a connectivity standard for Plug-In Electrical Vehicle.
Power line communication (PLC) – Qualcomm Atheros is a member of the HomePlug Powerline Alliance. Its AMP brand of powerline chips support the IEEE 1901 global powerline standard that supports high-definition multimedia and real-time gaming at a 500Mbit/s PHY rate. Low powered chips, such as those built for HomePlug Green PHY, are targeted toward smart grid and smart home applications.
On 18 October 2016, the HomePlug Alliance announced that all of its specifications would be put into the public domain and that other organizations would be taking on future activities relating to deployment of the existing technologies. There was no mention in the announcement of any further technology development within the HomePlug community.