Synonyms for jesd or Related words with jesd
Examples of "jesd"
JAM / STAPL ("Standard Test and Programming Language") is an Altera-developed standard for JTAG in-circuit programming of programmable logic devices which is defined by JEDEC standard
The JEDEC DDR3 SDRAM standard
-79-3d uses Mb and Gb to specify binary memory capacity: ""The purpose of this Standard is to define the minimum set of requirements for JEDEC compliant 512 Mb through 8 Gb for x4, x8, and x16 DDR3 SDRAM devices.""
A designer can attempt to minimize the rate of soft errors by judicious device design, choosing the right semiconductor, package and substrate materials, and the right device geometry. Often, however, this is limited by the need to reduce device size and voltage, to increase operating speed and to reduce power dissipation. The susceptibility of devices to upsets is described in the industry using the JEDEC
A SIMM, or single in-line memory module, is a type of memory module containing random-access memory used in computers from the early 1980s to the late 1990s. It differs from a dual in-line memory module (DIMM), the most predominant form of memory module today, in that the contacts on a SIMM are redundant on both sides of the module. SIMMs were standardised under the JEDEC
Gunning transceiver logic or GTL is a type of logic signaling used to drive electronic backplane buses. It has a voltage swing between 0.4 volts and 1.2 volts—much lower than that used in TTL and CMOS logic—and symmetrical parallel resistive termination. The maximum signaling frequency is specified to be 100 MHz, although some applications use higher frequencies. GTL is defined by JEDEC standard
8-3 (1993) and was invented by William Gunning while working for Xerox at the Palo Alto Research Center.
Copyright © 2017