Synonyms for wquxga or Related words with wquxga
Examples of "wquxga"
In 2002 ViewSonic announced a 3840 × 2400
, 22.2-inch monitor, VP2290.
In June 2001,
was introduced in the IBM T220 LCD monitor using a LCD panel built by IDTech. LCD displays that support
resolution include: IBM T220, IBM T221, Iiyama AQU5611DTBK, ViewSonic VP2290, ADTX MD22292B, and IDTech MD22292 (models B0, B1, B2, B5, C0, C2). IDTech was the original equipment manufacturer which sold these monitors to ADTX, IBM, Iiyama, and ViewSonic. However, none of the
monitors (IBM, ViewSonic, Iiyama, ADTX) are in production anymore: they had prices that were well above even the higher end displays used by graphic professionals, and the lower refresh rates, 41 Hz and 48 Hz, made them less attractive for many applications.
(Wide Quad Ultra Extended Graphics Array) describes a display standard that supports a resolution of 3840×2400 pixels, which provides a 16:10 aspect ratio. This resolution is exactly four times 1920×1200 (in pixels).
High pixel density display technologies would make supersampled antialiasing obsolete, enable true WYSIWYG graphics and, potentially enable a practical “paperless office” era. For perspective, such a device at 15 inch (38 cm) screen size would have to display more than four Full HD screens (or
The IBM T220 and T221 are LCD monitors sold between 2001 and 2005, with a native resolution of 3840×2400 pixels (
) on a screen with a diagonal of 22.2 inches (564 mm). This works out as over 9.2 million pixels, with pixel density of 204 pixels per inch (80 dpcm, 0.1245 mm pixel pitch), much higher than contemporary computer monitors (about 100 pixels per inch) and approaching the resolution of print media. The display family was nicknamed "Big Bertha" in some trade journals. Costing around $8400 in 2003, the displays saw few buyers. Such a high-resolution displays would remain niche products for nearly a decade until modern high-dpi displays such as Apple's retina display line saw more-widespread adoption.
is the maximum resolution supported by DisplayPort 1.2, though actually displaying such a resolution on a device with DisplayPort 1.2 is dependent on the graphics system in much the same way devices with VGA connectors do not necessarily maximize that standard's highest possible resolution. Most display cards with a DVI connector are capable of supporting the 3840×2400 resolution. However, the maximum refresh rate will be limited by the number of DVI links which are connected to the monitor. 1, 2, or 4 DVI connectors are used to drive the monitor using various tile configurations. Only the IBM T221-DG5 and IDTech MD22292B5 support the use of dual-link DVI ports through an external converter box. Many systems using these monitors use at least two DVI connectors to send video to the monitor. These DVI connectors can be from the same graphics card, different graphics cards, or even different computers. Motion across the tile boundary(ies) can show tearing if the DVI links are not synchronized. The display panel can be updated at a speed between 0 Hz and 41 Hz (48 Hz for the IBM T221-DG5, -DGP, and IDTech MD22292B5). The refresh rate of the video signal can be higher than 41 Hz (or 48 Hz) but the monitor will not update the display any faster even if graphics card(s) do so.
Copyright © 2017